Don't Skip This!

While the Me2 is very simple to get up and running, mistakes can happen if you don't follow a few basic instructions outlined in this getting started guide.
It’ll be really quick, promise!

Getting started guide

This guide will walk you through the process of unboxing, setting up and connecting your Me2. Don't forget to register your Me2 so we can keep you updated and provide better support on your 3D printing journey.

What's in the Box?

Me2 3D Printer
PolyMaker Polyplus PLA Filament (300g)
BuildTak Sheet
19V Power Supply
USB cable
Maintenance Kit

Putting it Together

The Me2 is shipped with the print bed (the 'Y-Axis') removed for transport. To reinstall Y-axis:
1. Remove the two screws on the right hand side of the bed and remove the endcap (with the belt still attached).
2. Feed the endcap and black extrusion all the way through the wheels.
3. Pull the belt over the pulley.
4. Reinstall the endcap and screws.

Putting it Together

The Me2 ships with the print bed (the 'Y-Axis') removed for transport. To reinstall the Y-axis:
1. Remove the two screws on the right hand side of the bed and remove the endcap (with the belt still attached).
2. Feed the endcap and black extrusion all the way through the wheels.
3. Pull the belt over the pulley.
4. Reinstall the endcap and screws.

Register Your Me2

Fill out this simple form to register your Me2. This will help us to provide you with better support should the need arise and let you know if there are any updates for your model.

Set Up Your Printer

Run the installer, open the program, click “ADD” and follow the setup prompts. Update software settings periodically with our latest pre-sets by using "Import” in the settings tab.

SET YOUR SLEEP AND POWER SETTINGS TO “ALWAYS ON” TO AVOID YOUR COMPUTER GOING TO SLEEP MID-PRINT.

Set Up Your Printer

Run the installer, open the program, click “ADD” and follow the setup prompts. Update software settings periodically with our latest pre-sets by using "Import” in the settings tab.

SET YOUR SLEEP AND POWER SETTINGS TO “ALWAYS ON” TO AVOID YOUR COMPUTER GOING TO SLEEP MID-PRINT.

Load Filament into the Printer

Having trouble with any of these steps?
Go to our troubleshooting guide.
I need inspiration!
We regularly collect and share cool things we find from around the world.
Got a general product question?
Its most likely someone else has already asked and had it answered.
“How do I...?"
Check out our comprehensive "how-to" articles for more advanced instructions.
Having trouble with any of these steps?
Go to our troubleshooting guide.
Got a general product question?
Its most likely someone else has already asked and had it answered.
I need inspiration!
We regularly collect and share cool things we find from around the world.
“How do I...?"
Check out our comprehensive "how-to" articles for more advanced instructions.